How to Open and Use AtheroCare Tubes

If you’ve received your AtheroCare cyclodextrin and need guidance on how to open and use the tube properly, this step-by-step guide will help ensure a smooth and effective application.

Heres a quick video showing you how to open our tube.



Directions for Use:

1. Open the Tube
Twist the tip while pressing the tip inwards. Pressing the tip inwards at the same time helps to create a cleaner break.  

Do not use scissors, as this may create sharp edges. 

The tip that breaks off can be used as a tool to make the edges of the tube smooth. It can also be used to open the end up more if needed.  See the video to see how this is done.  

2. Lubricate the Nozzle
Apply a generous amount of the supplied lubricant along the length of the narrow nozzle.

3. Insert the Nozzle
Gently and slowly insert the nozzle fully into the rectum.

4. Dispense the Solution
Squeeze the tube slowly and fully to release the contents while holding the tube firmly.

5. Remove the Tube
Keeping the tube squeezed, carefully withdraw the nozzle from the rectum.

Additional Guidance:

- It is recommended to retain the solution for at least 30 minutes after application.

- Each tube contains enough solution to allow for a small amount of wastage, so there’s no need to extract every last drop.

- Dispose of the empty tube after use.

- Do not use if the tube is damaged or expired.

If you have any questions or need further guidance, feel free to reach out to our support team. We’re here to help!

Watch the video on youtube 
https://www.youtube.com/shorts/DhjVoepHmRE

Disclaimer: This article is for informational and educational purposes only. It does not constitute medical advice, diagnosis, or treatment. Always consult a qualified healthcare professional for medical advice or concerns about your health.